Kabel Feeder Coaxial Merk Hansen 7/8" LOW LOSS Tipe 3A01170028
| Konstruksi | |||
| konduktor batin | materi | tabung tembaga alus | |
| dia. | 9,30±0,10 mm | ||
| isolasi | materi | busa fisik PE | |
| dia. | 22,40±0,40 mm | ||
| konduktor njaba | materi | ring corrugated tembaga | |
| diameteripun | 25,60±0,30 mm | ||
| jaket | materi | PE utawa fire retardant PE | |
| diameteripun | 27,90±0,20 mm | ||
| sifat mekanik | |||
| mlengkung radius | tunggal bola-bali obah | 127 mm 254 mm 500 mm | |
| kekuatan narik | 1590 N | ||
| ngremuk resistance | 1,4 kg/mm | ||
| suhu dianjurake | Jaket PE | nyimpen | -70±85°C |
| instalasi | -40±60°C | ||
| operasi | -55±85°C | ||
| jaket PE tahan geni | nyimpen | -30±80°C | |
| instalasi | -25±60°C | ||
| operasi | -30±80°C | ||
| sifat listrik | |||
| impedansi | 50±2 Ω | ||
| kapasitansi | 75 pF/m | ||
| induktansi | 0,19 uH/m | ||
| kacepetan panyebaran | 87 % | ||
| tegangan breakdown DC | 6,0 kv | ||
| resistance insulasi | > 5000 MQ.km | ||
| daya puncak | 91 kW | ||
| screening atenuasi | > 120 dB | ||
| frekuensi cut-off | 5.0 GHz | ||
| atenuasi lan daya rata-rata | |||
| frekuensi, MHz | tingkat daya @ 40 ° C, kW | nom.atenuasi@20°C,dB/100m | |
| 200 | 5.05 | 1.67 | |
| 450 | 3.29 | 2.55 | |
| 800 | 2.42 | 3.48 | |
| 900 | 2.26 | 3.7 | |
| 1000 | 2.14 | 3.93 | |
| 1800 | 1.54 | 5.44 | |
| 2000 | 1.46 | 5.77 | |
| 2200 | 1.38 | 6.09 | |
| 2500 | 1.28 | 6.55 | |
| 3000 | 1.15 | 7.27 | |
| Nilai atenuasi maksimal bisa uga 105% saka nilai atenuasi nominal. | |||
| VSWR | |||
| 690-960MHz | ≤1.12 | ||
| 1700-2200MHz | ≤1.15 | ||
| 2300-2400MHz | ≤1.15 | ||
| standar | |||
| 2011/65/EU | manut | ||
| IEC61196.1-2005 | manut | ||
Referensi packing
Konektor RF
Model: TEL-4310F.12-RFC
Katrangan
4.3-10 Konektor wadon kanggo kabel RF fleksibel 1/2″
| Bahan lan Plating | |
| Kontak tengah | Kuningan/Silver Plating |
| Insulator | PTFE |
| Konduktor Badan & Luar | Kuningan/alloy plated karo tri-alloy |
| Gasket | Karet Silikon |
| Karakteristik Listrik | |
| Impedansi karakteristik | 50 ohm |
| Range Frekuensi | DC ~ 3 GHz |
| Ketahanan Isolasi | ≥5000MΩ |
| Kekuwatan dielektrik | ≥2500 V rms |
| Resistansi kontak tengah | ≤1,0 mΩ |
| Resistansi kontak njaba | ≤1,0 mΩ |
| Mundhut Selipan | ≤0.1dB@3GHz |
| VSWR | ≤1.1@-3.0GHz |
| Kisaran suhu | -40~85 ℃ |
| PIM dBc(2×20W) | ≤-160 dBc(2×20W) |
| anti banyu | IP67 |
Instruksi Instalasi N utawa 7/16 utawa 4310 1/2″ kabel super fleksibel
Struktur konektor: (Gambar 1)
A. kacang ngarep
B. kacang mburi
C. pasak
Dimensi stripping minangka ditampilake ing diagram (Fig2), manungsa waé kudu mbayar nalika stripping:
1. Lumahing mburi konduktor utama kudu chamfered.
2. Copot impurities kayata ukuran tembaga lan burr ing lumahing mburi kabel.
Assembling bagean sealing: Meneng bagean sealing ing sadawane konduktor njaba kabel minangka ditampilake ing diagram (Fig3).
Ngumpulake kacang mburi (Gambar 3).
Gabungke nut ngarep lan mburi kanthi screwing kaya sing dituduhake ing diagram (Fig (5)
1. Sadurunge screwing, smear lapisan lubricating grease ing o-ring.
2. Tansah nut mburi lan kabel obah, Meneng ing awak Nihan utama ing awak Nihan mburi.Screw mudhun awak cangkang utama awak cangkang mburi nggunakake kunci monkey.Rakitan wis rampung.
